The brief introduction of mixture machine

There are several kinds of method to calculate the mixture ratio of fly ash concrete, below are just a relatively simple calculation method, for reference: The calculation principle: according to the actual volume. According to the design of the concrete grade and the practical experience to determine the cement dosage, and assume that the cement mortar filling ceramsite fly ash surface between the porosity and package.

Calculation steps:

1) according to the strength of ceramsite concrete label label (design) and cement, to determine the cement dosage.

2) according to the concrete design label and work degree index to determine the water cement ratio and effective water use.

3) according to the ceramsite porosity to calculate the sand usage dosage.

4) calculated by the dosage of cement, sand and water volume of components.

5) to calculate ceramsite usage:

Dosage of ceramsite = ceramsite grain density * (1 – cement sand volume – volume water volume)

6) according to the ceramsite bibulous rate, calculate the ceramsite 15 minutes water quantity (in some places water absorbing capacity of using ceramsite 30 minutes) and total dosage of mixing water. As a leading enterprise of mining machinery manufacturer of China, our company has strong technical force and powerful production capacity and can produce aggregate crushing, cement equipments, chute feeder, compound cone crusher, flotation machine, etc.

The axes of rod mill main frame should be level, measured on top of big flange of medium-altitude bearing that on two ends, the height should be identical. If has error, it is allowed that feeder is higher the output 1mm. Seen from bearing cover of medium-altitude bearing on two ends, the around gap between medium-altitude bearing and bearing cover should be identical, and the out and the inside bearing cover too.

classifier: http://www.breaker-machine.com/classifier/